207A Wrench Set - Non-Condensing Stanleys

Three wrenches specifically designed to tighten the packing nuts on non-condensing pumps.  Manufactured out of stainless steel.   Openings are 7/8", 1-1/2" and 1-3/4".

Notes

These packing nut wrenches are designed for Stanley pumps only and not for engines.  A properly packed pump should be tightened hand-tightened until the packing feels solid.  If the pump leaks, then further tightening with these wrenches is used.  A 60^o or about 1/6^th of a turn at a time is all that is needed to properly compress the packing material.  If the pump continues to leak after two or three applications of this process pump packing is probably used & in need of replacing.  Other valve components may be worn or damaged.

 The use of these wrenches for larger, heavier packing nuts, such as those on the engine, require a larger wrench.   The packing nuts in the engine should also be hand tightened before ¼ to ½ turn of the nut with a wrench.  Packing nut gland wrenches are numbers 205A, 205B, and 205C for the 10, 20, and 30 HP engines in the Vintage Steam Products catalog.